- Pulling by drilling and inserting a fluted rod driven by a 6-point.
- Spread: studs - 6 to 14 mm.
- Right or left-hand pitch.
- Supplied in case 165 x 130 x 25 mm.
Weight: 0.540 kg.
- 285.J10: Set of 5 stud pullers + 5 appropriate tapered and tap wrench 831.1 (use with the 4 small pullers only).
Tray PL.464.
- 285.JS10: Set of 5 stud pullers and 5 adapted tapered drill-bits supplied on stand.
- 285.JS5: Set of 5 stud pullers supplied on stand.
- Supplied in plastic case BP.104
- Dimensions: 204 x 122 x 52 mm.
- 285.J10: Set of 5 stud pullers + 5 appropriate tapered and tap wrench 831.1 (use with the 4 small pullers only).
Tray PL.464.
- 285.JS10: Set of 5 stud pullers and 5 adapted tapered drill-bits supplied on stand.
- 285.JS5: Set of 5 stud pullers supplied on stand.
- Supplied in plastic case BP.104
- Dimensions: 204 x 122 x 52 mm.
- 285.J10: Set of 5 stud pullers + 5 appropriate tapered and tap wrench 831.1 (use with the 4 small pullers only).
Tray PL.464.
- 285.JS10: Set of 5 stud pullers and 5 adapted tapered drill-bits supplied on stand.
- 285.JS5: Set of 5 stud pullers supplied on stand.
- Supplied in plastic case BP.104
- Dimensions: 204 x 122 x 52 mm.
- Choose the hole suited to the stud diameter.
- Tighten or untighten: thanks to its eccentric shaft the knob grips the stud for tightening or untightening.
- Choose the hole suited to the stud diameter.
- Tighten or untighten: thanks to its eccentric shaft the knob grips the stud for tightening or untightening.
- Capacity: - 6 to 16 mm.
- Turned by means of the hexagonal drive or a 1/2 " - 12.7 mm ratchet. Except model 287B.16 which has a through-hole for a bar.
- Allows to tighten or untighten the studs.
- Capacity: - 6 to 16 mm.
- Turned by means of the hexagonal drive or a 1/2 " - 12.7 mm ratchet. Except model 287B.16 which has a through-hole for a bar.
- Allows to tighten or untighten the studs.
- Capacity: - 6 to 16 mm.
- Turned by means of the hexagonal drive or a 1/2 " - 12.7 mm ratchet. Except model 287B.16 which has a through-hole for a bar.
- Allows to tighten or untighten the studs.
- Capacity: - 6 to 16 mm.
- Turned by means of the hexagonal drive or a 1/2 " - 12.7 mm ratchet. Except model 287B.16 which has a through-hole for a bar.
- Allows to tighten or untighten the studs.
- Capacity: - 6 to 16 mm.
- Turned by means of the hexagonal drive or a 1/2 " - 12.7 mm ratchet. Except model 287B.16 which has a through-hole for a bar.
- Allows to tighten or untighten the studs.
- Capacity: - 6 to 16 mm.
- Turned by means of the hexagonal drive or a 1/2 " - 12.7 mm ratchet. Except model 287B.16 which has a through-hole for a bar.
- Allows to tighten or untighten the studs.
- Capacity: - 6 to 16 mm.
- Turned by means of the hexagonal drive or a 1/2 " - 12.7 mm ratchet. Except model 287B.16 which has a through-hole for a bar.
- Allows to tighten or untighten the studs.
- Capacity: - 6 to 16 mm.
- Turned by means of the hexagonal drive or a 1/2 " - 12.7 mm ratchet. Except model 287B.16 which has a through-hole for a bar.
- Allows to tighten or untighten the studs.
- Set of 5 stud drivers to screw and unscrew the M6 M7 M8 M9 and M10 studs (287B.6 to 287B.10).
- Presentation on stand (CKS.73A).
- Dimensions (L x W x H): 155 x 175 x 35 mm.
Weight: 1.100 kg.
